Airtac Pneumatic Solenoid Valve (3V1-06) 1/8 inch 3 Way 2 Position

Description

Structure in sliding column mode: good tightness and sensitive reaction.
Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
No need to add oil for lubrication.
It is available to form integrated valve group with the base to save installation space.
Affiliated manual devices are equipped to facilitate installation and debugging.
Several voltage grades are optional.

Before installing, be sure the valve has not been damaged via transportation.
Its suggested to use the medium lubricated by 40μm filter element.
Be aware of the flow direction and port size.
Please notice whether the installation condition accords with technical requirements (such as voltage, actuation frequency, working pressure and scope of application temperature), then the equipment can be installed and used.
Take measure to avoid vibration and frozen.
Before using the fittings and tubes make sure they are clean.
When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
To keep the dust away, please use the silencer for the exhaust ports.
Never forget to install dirt-proof boot in air intake and outlet during dismounting.
After installing, please use the manual override to test valve first.

There are no reviews yet.

Be the first to review “Airtac Pneumatic Solenoid Valve (3V1-06) 1/8 inch 3 Way 2 Position”